Mold Inspection Lynbrook, NY

Mold Inspection in Lynbrook, NY 11563

Mold Remediation Steps Following A Black Mold Inspection

Fire, storms, and water can all be disastrous and cause significant damage to your property. While if there’s one word that makes homeowners worry, it’s ‘Black Mold”. You’ve probably heard about the risks of black mold, an alleged silent killer that hides in water and ceiling tiles. However, what exactly is black mold?

Stachybotrys chartarum, also known as black mold, appears as blackish-green spots or blemishes. It thrives on moist, cellulose-rich surfaces such as fiberboard, drywall, and gypsum board.

Black mold is primarily attracted to moisture, so it can be found in previously flooded homes that are exposed to moisture damage, clogged pipe areas, or anywhere there is severe water damage.

How Can I Remove Black Mold From My Home?

If you suspect black mold is growing in your home, you must first identify it and remove it. However, the black mold cleanup process should not be attempted on your own. If black mold levels are abnormally high, indoor air quality testing or a black mold inspection is recommended, followed by remediation.

A professional black mold inspection company in NY with credentialed, trained professionals who have experience removing and cleaning up mold from an indoor environment should handle this. After black mold inspection, the mold cleanup company in Lynbrook will begin the mold remediation process.

Six Steps A Mold Inspection Company Takes To Eliminate Black Mold

1) Application Of Antimicrobials

This is the first corrective action step after the restoration process. Suppose your home or business in Nassau County has recently experienced severe water damage, but there is no visible mold growth.

In that case, we apply an antimicrobial agent to prevent long-term mold growth until the wet area has dried out. If mold spores are present, antimicrobials can kill them.

2) Identification Of The Source

Mold is frequently found in areas that have previously been exposed to water or are near a moisture source. Condensation causes problems in the bathroom, basement, sink cabinet, and window seal.

Using cutting-edge, industry-specific moisture detection equipment and inspection tools such as thermal imaging, our proficient black mold inspection technicians in Lynbrook, NY, can detect elevated moisture concentrations in new and existing buildings. This can frequently aid in determining the source of the moisture intrusion.

3) Limitation On The Mold Growth

Mold can rapidly spread if the right conditions exist. Once the origin of the moisture intrusion has been fixed, the black mold inspection technicians in Nassau County will isolate the contaminated areas to prevent mold spores from spreading to other parts of the property.

Containment is critical in minimizing the possible effects of cross-contamination to other sites that are not directly impacted.

4) Air Filtration Process

Mold spores can be disturbed and become airborne during the mold removal process. In addition to containment, the air must also be cleaned.

Negative air machines with high-efficiency particulate air filters (HEPA) continuously run throughout the project. Mold spores, dust, microbial polycyclic aromatic hydrocarbons (MVOCs), and other airborne wreckage are excluded from the affected region.

5) Disposal & Cleanup

In most cases, the only effective way to ensure proper mold remediation is to remove affected materials altogether. Drywall, insulation, wood trim, window seal, carpet, window frame, and even furniture are frequently cleaned.

If the mold-contaminated area is more significant than 10 square feet, the services of a licensed environmental hygienist are required. The hygienist will perform a final clearance test to ensure that the mold has been adequately mitigated.

6) Substitute Mold Affected Region

As previously stated, areas contaminated by mold and moisture damage may necessitate the removal of affected materials.

In such cases, at First Response Restoration and Cleaning Inc. in Lynbrook, NY, we can offer restoration and water damage assessment services and repair damaged areas with new building materials. In the end, the property will be returned to its pre-loss condition.

Why Do You Need A Black Mold Inspection & Restoration Company?

Cleaning up mold can be a complex process. To do the job properly, specific equipment, training, and certification are required to do the job correctly. The long-term presence of the mold spore can be toxic and pose a health risk if not adequately treated.

To clean up mold, it’s critical to seek assistance from a reputable water damage assessment and restoration company in Lynbrook, NY, with well-trained personnel and the necessary equipment.

If you need help with the restoration process and mold damages in your property, First Response Restoration and Cleaning Inc. in Lynbrook, NY is your one-stop solution.

How First Response Restoration and Cleaning Inc. Can Assist You In Mold Damage Mitigation?

Lynbrook, NY

First Response Restoration and Cleaning Inc. is an IICRC-certified full-service property restoration and mold removal company in Lynbrook, NY that can evaluate water damage and mold growth.

Our extensive experience will assist in determining the source of the mold spore and implementing the appropriate solutions to restore your property in NY.

Our mold removal team in Nassau County has the knowledge, experience, and specialized equipment to solve water damage and mold growth. We provide mold remediation services in NY in a timely, efficient, and thorough manner.

Call us on 516-541-0500 today to learn more about our mold remediation and cleanup services in Lynbrook, NY.


Some information about Lynbrook, NY

Lynbrook is a village in Nassau County, New York, United States, on the south shore of Long Island. The population was 19,427 at the 2010 census. The Incorporated Village of Lynbrook is inside the Town of Hempstead, neighboring Malverne to the north, Valley Stream to the west, Hewlett to the southwest, East Rockaway to the southeast, and Rockville Centre to the east. The Village of Lynbrook’s current mayor is Alan Beach.

The area currently known as Lynbrook had other names, including Rechquaakie (originally), Parson’s Corners, and Bloomfield. It was later named Pearsall’s Corners, after Mr. Pearsall’s General Store because this store became a famous stagecoach stop for travelers coming from New York City to Long Island. Alternately, it was called ‘Five Corners’ because the stagecoach stop was at the crossing of Hempstead Avenue, Merrick Road, and Broadway. It became known as Lynbrook in 1894 and the village was incorporated in 1911. The name ‘Lynbrook’ is derived by dividing ‘Brooklyn’ into its syllables and transposing them, a tribute to the original home of many of the town’s turn-of-the-century residents.

Since 1912, Lynbrook has been served by the Lynbrook Police Department. The Chief of the Department is Brian Palladino. Since 1879, the Lynbrook Volunteer Fire Department has served Lynbrook. The department has 6 firehouses around Lynbrook. The Chief of the Department is Nicholas Pearsall. Lynbrook is also served by its own Department of Public Works which provides sanitation management. The Superintendent is Phil Healey.

In 2008, three houses in Lynbrook were listed on the National Register of Historic Places: House at 251 Rocklyn Avenue, House at 474 Ocean Avenue, and House at 73 Grove Street. Rockville Cemetery was listed in 2015.

Learn more about Lynbrook.

Directions from Lynbrook, NY to First Response Restoration and Cleaning Inc.


Here are some cleaning-related links:

← Previous Service LocationNext Service Location →