Mold Inspection in Manhasset Hills, NY 11040
Mold Remediation Steps Following A Black Mold Inspection
Fire, storms, and water can all be disastrous and cause significant damage to your property. While if there’s one word that makes homeowners worry, it’s ‘Black Mold”. You’ve probably heard about the risks of black mold, an alleged silent killer that hides in water and ceiling tiles. However, what exactly is black mold?
Stachybotrys chartarum, also known as black mold, appears as blackish-green spots or blemishes. It thrives on moist, cellulose-rich surfaces such as fiberboard, drywall, and gypsum board.
Black mold is primarily attracted to moisture, so it can be found in previously flooded homes that are exposed to moisture damage, clogged pipe areas, or anywhere there is severe water damage.
How Can I Remove Black Mold From My Home?
If you suspect black mold is growing in your home, you must first identify it and remove it. However, the black mold cleanup process should not be attempted on your own. If black mold levels are abnormally high, indoor air quality testing or a black mold inspection is recommended, followed by remediation.
A professional black mold inspection company in NY with credentialed, trained professionals who have experience removing and cleaning up mold from an indoor environment should handle this. After black mold inspection, the mold cleanup company in Manhasset Hills will begin the mold remediation process.
Six Steps A Mold Inspection Company Takes To Eliminate Black Mold
1) Application Of Antimicrobials
This is the first corrective action step after the restoration process. Suppose your home or business in Nassau County has recently experienced severe water damage, but there is no visible mold growth.
In that case, we apply an antimicrobial agent to prevent long-term mold growth until the wet area has dried out. If mold spores are present, antimicrobials can kill them.
2) Identification Of The Source
Mold is frequently found in areas that have previously been exposed to water or are near a moisture source. Condensation causes problems in the bathroom, basement, sink cabinet, and window seal.
Using cutting-edge, industry-specific moisture detection equipment and inspection tools such as thermal imaging, our proficient black mold inspection technicians in Manhasset Hills, NY, can detect elevated moisture concentrations in new and existing buildings. This can frequently aid in determining the source of the moisture intrusion.
3) Limitation On The Mold Growth
Mold can rapidly spread if the right conditions exist. Once the origin of the moisture intrusion has been fixed, the black mold inspection technicians in Nassau County will isolate the contaminated areas to prevent mold spores from spreading to other parts of the property.
Containment is critical in minimizing the possible effects of cross-contamination to other sites that are not directly impacted.
4) Air Filtration Process
Mold spores can be disturbed and become airborne during the mold removal process. In addition to containment, the air must also be cleaned.
Negative air machines with high-efficiency particulate air filters (HEPA) continuously run throughout the project. Mold spores, dust, microbial polycyclic aromatic hydrocarbons (MVOCs), and other airborne wreckage are excluded from the affected region.
5) Disposal & Cleanup
In most cases, the only effective way to ensure proper mold remediation is to remove affected materials altogether. Drywall, insulation, wood trim, window seal, carpet, window frame, and even furniture are frequently cleaned.
If the mold-contaminated area is more significant than 10 square feet, the services of a licensed environmental hygienist are required. The hygienist will perform a final clearance test to ensure that the mold has been adequately mitigated.
6) Substitute Mold Affected Region
As previously stated, areas contaminated by mold and moisture damage may necessitate the removal of affected materials.
In such cases, at First Response Restoration and Cleaning Inc. in Manhasset Hills, NY, we can offer restoration and water damage assessment services and repair damaged areas with new building materials. In the end, the property will be returned to its pre-loss condition.
Why Do You Need A Black Mold Inspection & Restoration Company?
Cleaning up mold can be a complex process. To do the job properly, specific equipment, training, and certification are required to do the job correctly. The long-term presence of the mold spore can be toxic and pose a health risk if not adequately treated.
To clean up mold, it’s critical to seek assistance from a reputable water damage assessment and restoration company in Manhasset Hills, NY, with well-trained personnel and the necessary equipment.
If you need help with the restoration process and mold damages in your property, First Response Restoration and Cleaning Inc. in Manhasset Hills, NY is your one-stop solution.
How First Response Restoration and Cleaning Inc. Can Assist You In Mold Damage Mitigation?
First Response Restoration and Cleaning Inc. is an IICRC-certified full-service property restoration and mold removal company in Manhasset Hills, NY that can evaluate water damage and mold growth.
Our extensive experience will assist in determining the source of the mold spore and implementing the appropriate solutions to restore your property in NY.
Our mold removal team in Nassau County has the knowledge, experience, and specialized equipment to solve water damage and mold growth. We provide mold remediation services in NY in a timely, efficient, and thorough manner.
Call us on 516-541-0500 today to learn more about our mold remediation and cleanup services in Manhasset Hills, NY.
Some information about Manhasset Hills, NY
Manhasset Hills is a hamlet and census-designated place (CDP) in the Town of North Hempstead in Nassau County, on Long Island, in New York, United States. The population was 3,592 at the 2010 census. Neighboring communities include Herricks, North Hills, North New Hyde Park, and Lake Success.
By the late 1950s, much of the land in Manhasset Hills had been developed by developers. One of the last major developments to be built was the Cherrywood Homes development, which was built on a 24-acre tract by Barney and Martin Spiegel. The development was built with 88 split-level houses designed by A.H. Salkowitz, and was constructed on one of the last remaining major undeveloped tracts of land available in Manhasset Hills.
In the 1980s and 1990s, roughly 1,000 Manhasset Hills residents attempted to prevent the State of New York from placing a group home in their neighborhood for people with mental disabilities. Many were concerned that their property values would decrease because of the group home’s presence, and attempted to change a law in order to prevent the home from being established. The residents were successful in preventing the group home from being established in their community, and the home was instead established in nearby New Hyde Park.
The Long Island Motor Parkway used to run along the northern border of the hamlet.
Directions from Manhasset Hills, NY to First Response Restoration and Cleaning Inc.
Here are some cleaning-related links:
- International Janitorial Cleaning Services Association
- International Sanitary Supply Association
- Association of Residential Cleaning Services International
- Cleaning For A Reason: An ISSA Charity