Mold Inspection in Mineola, NY 11501
Mold Remediation Steps Following A Black Mold Inspection
Fire, storms, and water can all be disastrous and cause significant damage to your property. While if there’s one word that makes homeowners worry, it’s ‘Black Mold”. You’ve probably heard about the risks of black mold, an alleged silent killer that hides in water and ceiling tiles. However, what exactly is black mold?
Stachybotrys chartarum, also known as black mold, appears as blackish-green spots or blemishes. It thrives on moist, cellulose-rich surfaces such as fiberboard, drywall, and gypsum board.
Black mold is primarily attracted to moisture, so it can be found in previously flooded homes that are exposed to moisture damage, clogged pipe areas, or anywhere there is severe water damage.
How Can I Remove Black Mold From My Home?
If you suspect black mold is growing in your home, you must first identify it and remove it. However, the black mold cleanup process should not be attempted on your own. If black mold levels are abnormally high, indoor air quality testing or a black mold inspection is recommended, followed by remediation.
A professional black mold inspection company in NY with credentialed, trained professionals who have experience removing and cleaning up mold from an indoor environment should handle this. After black mold inspection, the mold cleanup company in Mineola will begin the mold remediation process.
Six Steps A Mold Inspection Company Takes To Eliminate Black Mold
1) Application Of Antimicrobials
This is the first corrective action step after the restoration process. Suppose your home or business in Nassau County has recently experienced severe water damage, but there is no visible mold growth.
In that case, we apply an antimicrobial agent to prevent long-term mold growth until the wet area has dried out. If mold spores are present, antimicrobials can kill them.
2) Identification Of The Source
Mold is frequently found in areas that have previously been exposed to water or are near a moisture source. Condensation causes problems in the bathroom, basement, sink cabinet, and window seal.
Using cutting-edge, industry-specific moisture detection equipment and inspection tools such as thermal imaging, our proficient black mold inspection technicians in Mineola, NY, can detect elevated moisture concentrations in new and existing buildings. This can frequently aid in determining the source of the moisture intrusion.
3) Limitation On The Mold Growth
Mold can rapidly spread if the right conditions exist. Once the origin of the moisture intrusion has been fixed, the black mold inspection technicians in Nassau County will isolate the contaminated areas to prevent mold spores from spreading to other parts of the property.
Containment is critical in minimizing the possible effects of cross-contamination to other sites that are not directly impacted.
4) Air Filtration Process
Mold spores can be disturbed and become airborne during the mold removal process. In addition to containment, the air must also be cleaned.
Negative air machines with high-efficiency particulate air filters (HEPA) continuously run throughout the project. Mold spores, dust, microbial polycyclic aromatic hydrocarbons (MVOCs), and other airborne wreckage are excluded from the affected region.
5) Disposal & Cleanup
In most cases, the only effective way to ensure proper mold remediation is to remove affected materials altogether. Drywall, insulation, wood trim, window seal, carpet, window frame, and even furniture are frequently cleaned.
If the mold-contaminated area is more significant than 10 square feet, the services of a licensed environmental hygienist are required. The hygienist will perform a final clearance test to ensure that the mold has been adequately mitigated.
6) Substitute Mold Affected Region
As previously stated, areas contaminated by mold and moisture damage may necessitate the removal of affected materials.
In such cases, at First Response Restoration and Cleaning Inc. in Mineola, NY, we can offer restoration and water damage assessment services and repair damaged areas with new building materials. In the end, the property will be returned to its pre-loss condition.
Why Do You Need A Black Mold Inspection & Restoration Company?
Cleaning up mold can be a complex process. To do the job properly, specific equipment, training, and certification are required to do the job correctly. The long-term presence of the mold spore can be toxic and pose a health risk if not adequately treated.
To clean up mold, it’s critical to seek assistance from a reputable water damage assessment and restoration company in Mineola, NY, with well-trained personnel and the necessary equipment.
If you need help with the restoration process and mold damages in your property, First Response Restoration and Cleaning Inc. in Mineola, NY is your one-stop solution.
How First Response Restoration and Cleaning Inc. Can Assist You In Mold Damage Mitigation?
First Response Restoration and Cleaning Inc. is an IICRC-certified full-service property restoration and mold removal company in Mineola, NY that can evaluate water damage and mold growth.
Our extensive experience will assist in determining the source of the mold spore and implementing the appropriate solutions to restore your property in NY.
Our mold removal team in Nassau County has the knowledge, experience, and specialized equipment to solve water damage and mold growth. We provide mold remediation services in NY in a timely, efficient, and thorough manner.
Call us on 516-541-0500 today to learn more about our mold remediation and cleanup services in Mineola, NY.
Some information about Mineola, NY
Mineola is a village in and the county seat of Nassau County, Long Island, New York, United States. The population was 18,799 at the 2010 census. The name is derived from an Algonquin Chief, Miniolagamika, which means ‘pleasant village’.
The central, flat, grassy part of Long Island was originally named ‘Hempstead Plains’. In the 19th century, various communities were started. One of them was called ‘Hempstead Branch’, and finally, ‘Mineola’.
Long Island was part of Henry Hudson’s original claim in the name of the Dutch East India Company dating as far back as 1609. In the 18th century, the Dutch and English settlers worked to clear farmland to start their life on the Hempstead Plains. It was in 1858 when this land was named after an Algonquin Indian Chief, Miniolagamika meaning, ‘Pleasant Village’. The name was later shortened and altered to ‘Mineola’.
From about 1787 until the 1870s, the area was the county seat for Queens County, in a section then known as Clowesville,just outside the present village boundaries.The western portion of Queens became a borough of New York City in 1898, and in 1899 Nassau County was formed from the part of Queens that did not so consolidate. Voters selected Mineola (in the Town of North Hempstead) to be the county seat for the new county of Nassau in November 1898(before Mineola incorporated as a village in 1906 and set its boundaries), winning out over Hicksville and Hempstead.The Garden City Company (founded in 1893 by the heirs of Alexander Turney Stewart)donated four acres of land for the county buildings just south of the Mineola train station and the present day Village of Mineola, in the Town of Hempstead.
Directions from Mineola, NY to First Response Restoration and Cleaning Inc.
Here are some cleaning-related links:
- International Janitorial Cleaning Services Association
- International Sanitary Supply Association
- Association of Residential Cleaning Services International
- Cleaning For A Reason: An ISSA Charity